Warhammer Rescues: Blood Angels Land Raider

Off The Top of My Head

Warhammer Rescue Projects

No one would ever think Warhammer, Warhammer 40k, or any miniatures game is cheap. In fact a lot of board/table top games are pretty pricey (take a look at Fantasy Flight, Steve Jackson, or Fireside Games…they’re pretty high for what’s in the box…) but they usually don’t require maintenance or additions or new pieces. It basically comes down to how you want to spend your hobby money. Do you want to spend $500 on a new video game console, plus $60-$70 for new games to support it, or $500 on a playable starter army and $60-$70 on new units? I’ve preferred the latter recently. But it’s not always easy to shell out $69 plus shipping and taxes for a new unit. Especially when, with a little work, you can get a similar or identical unit for far less! You find them on eBay. They usually consist of damaged, incomplete, or poorly painted models. With the copious bits provided by GW with their sets (Deathwing set for example, it makes Deathwing Terminators, Deathwing Knights, or Deathwing Command squad, so you get a lot of extras) you can take a damaged model or one missing parts, add the extras, and make some nice custom pieces. I’ve found all it takes is some patience, a hobby blade, a toothbrush, and some LAs Totally Awesome cleanser and just about any model can be recovered.

Blood Angels Land Raider

This lander raider was sold as a “needs love” project. Boy was that an understatement.  It was originally a chaos land raider and I considered using it as one, however the idea of deep striking one of these things with my lil Blood Angels army was too tempting.

Original Condition:

Before3 Before2 Before1

It was a situation where you wonder who originally bought a $75 model and then didn’t seem to look at the instructions.  The top hull was glued on top of the side hulls leaving awful gap clearly visible on the top.  Also the side sponsons were glued on upside down.

The entire piece was so heavily glued it took over an hour with a very sharp hobby knife to get it all apart and, yes, some of it was damaged so badly it was impossible to make it look “as good as new.”

It got an overnight bath in LA’s Totally Awesome cleaner (seriously, it’s about $3 for a big bottle, soak overnight, it strips ANY paint off of metal, plastic, resin, without damaging the model.  Just warm water and a toothbrush.) then reglued correctly.

After Reassembly and Priming:

After1 After2 After3 After4

I made my retail land raider in the “Crusader” variant due to its high-troop transport capacity, so I had all the “Redeemer” variant bits available.  I moved the sponsons up, added some pieces of off a Baal Predator I had left over, and some various other parts from additional Space Marine vehicles.  Upon reassembly I had to take some liberties and change the basics of the model.  For example the sponson optics were broken and gone so I replaced them with spotlights.  I wanted assault cannons rather than heavy bolters so I clipped the barrels off of two extras from my Ravenwin upgrade sprues and glued them to the heavy bolters it came with.  There was a gap over the frag launchers I filled with standard poles from a Gors unit.  I also had to glued the front door closed as the original hinge was glued to the hull and had to be broken to disassemble it.

Work in Progress:

20140418_200209 20140419_103452 20140419_151949 20140419_152013

As I said it was impossible to hide the damage to the model so I “hung a lantern on it” as it were.  I wrote it into the story of the model, as though it’s a chapter relic and has been through serious wars, has received awful damage, but the might of the vehicle keeps it going.  This was especially true on the left side of the model where the awful over-gluing left major plastic damage to the unit.  You can see where I used some corrosion to make it appear as though it is battle damaged.

I used copious amounts of Typhus corrosion and some Forge World weathering powder to show the wear on the sides and the front door.

Nearly Finished Rescue Model:

SONY DSC SONY DSC SONY DSC SONY DSC SONY DSC SONY DSC SONY DSC SONY DSC SONY DSC

There are some other little touches I’d like to add but I think it’s pretty table ready now.  There are still some gaps that need filling and additional details I’d like to include but it’s worlds from where it started.

Is it the best Land Raider out there?  Not by far…  but for less than half price of the retail version and made with other additional parts I consider it a salvation of this vehicle’s machine spirit.  It may not be perfect…but I think the priests of Mars would approve…

 

Check out my previous painting posts for more!

Black Reach

Dredtrukk

Warboss with Attack Squig

Boss Zagstruk

Stormboy Nob on Flying Base

Bad Moons Nazdreg

Dark Angels Dreadnought

Dark Angels Standard Bearer

Dark Angels Librarian

Warhammer 40k Scenery

And for more 40k my Kharn illustration posts! Part 1 and Part 2.  And my fond farewell to the World of Battle.

Off the Top of My Head: Painting 40k Scenery

Off The Top of My Head

Wrahammer 40k and Citadel Scenery Painting

Official TableTop Day has come and gone but those of us who play table top games every day can be a table top day.  40k isn’t usually thought of in the same realm as “table top  games” even though it truly is.  I consider it almost a “table top lifestyle” as it really starts to seep into your thinking and, for an artist, your aesthetic.

Painting canvas isn’t something I do well or enjoy, unlike my RevPub Player 2, but I do love to paint models. and as I said in my Nazdreg post I love to create bases. One of my other favorite things to paint is scenery. Games Workshop/Citadel release some great-looking scenery for 40k. I love the little details and terrain pieces, especially rubble and ruins, and it’s fun to try to test some painting techniques on them.

These are from the Urban Barricades set and I painted them last year. With some of the new technical paints out now I’d like to maybe add some new touches to them, but I think they came out pretty well, at least well enough to be table ready!

20140406_191117 20140406_191223

I love this one with the Space Marine bike.

20140406_191257 20140406_191137 20140406_191156 20140406_191236 20140406_191242 20140406_191129

All the little skeletons and pieces are great small details.

 20140406_191205

This one with the door and unexploded ordinance is also wonderfully detailed.  I like the bullet holes, battle damage, and debris in these pieces.

 Over the holidays Citadel released some new technical paints that got me pretty excited. Yes I’m lame enough to get excited over technical paints, but I like to paint, I have a lot of fun with scenery, and I’ve been waiting for these kinds of paints to be available.

One of my favorite scenery pieces is the “battlescape” piece with the dead trees, craters, and the wrecked Rhino, complete with combat damage and customizable doors.

Metropolitan Government-20131127-00573 Metropolitan Government-20131128-00574

The base was basic Mournfang Brown then dry brushed with Longbeard Grey and Praxeti White.

20140406_190325 20140406_190253

The trees were the most difficult actually, I started with more Mournfang, dry brushed Praxeti, shaded with Biel-Tan Green, and glazed with Waywatcher Green.

Metropolitan Government-20131128-00576 Metropolitan Government-20131128-00575 20140406_190242 20140406_190232 20140406_190222

The Rhino I painted in Macragge Blue, then used the Typhus Corrosion + Ryza Rust combination shown in the technical paints video released late last year.  I also used some Forge World rust weathering powder to give the impression of the rust running off into the terrain.

20140406_190316

The craters I plan to add some water effect mixed with some combination of Moot Green and Skavenblight Dinge to make a murky green with a bit of oil. I’ve got an extra arm from an Ungor kit and some extra chaos bits so it’s not just the imperium showing the damage in this piece 😉

 Once the piece is completely finished (I’m still testing the water effect…) I’ll post an update!

Check out my previous painting posts for more!

Black Reach

Dredtrukk

Warboss with Attack Squig

Boss Zagstruk

Stormboy Nob on Flying Base

Bad Moons Nazdreg

Dark Angels Dreadnought

Dark Angels Standard Bearer

Dark Angels Librarian

And for more 40k my Kharn illustration posts! Part 1 and Part 2.  And my fond farewell to the World of Battle.

Off the Top of My Head: 40k Dark Angels Librarian Turmiel

Off The Top of My Head

This guy I painted the same day as I painted the standard bearer.  In fact I may have painted him first but who can remember such details now?

He’s the Dark Vengeance Dark Angels Librarian and GW really showed off what they could do with plastic minis in that set.  So much so that I’ve heard that finecast has met its demise going forward.  I had a previous librarian, but since this guy was so utterly Dark-Angel’d up, yo, I moved my other one to my little Blood Angels army.

I didn’t follow the exact color scheme used in the Dark Vengeance literature, but it’s more fun to riff a bit right?  He, like my standard bearer, needs some serious touch-ups as I can spot all kinds of places I didn’t blend well, but I do like his force sword!  Other areas are just things I can look forward to correcting soon.

20131210_202404[1] 20131210_202348[1] 20131210_202333[1] 20131210_202321[1]

I actually had two of these guys, but the crew in the sadly closed Woodfield Mall GW store gave me a GREAT idea what to do with my other one.  He’s been primered and painting has only just started on him but this is what I did with my other Turmiel:

20131210_202429[1] 20131210_202449[1] 20131210_202505[1] 20131210_202532[1]

I altered the command bike to carry an extra Tome of the Long Hunt from the Ravenwing upgrade sprue on the wings of the angels on the rear fender.

I’ve included several other little additions, such as the second volume on the side of the fender, A scroll from Skaven plague monks on the front fender, and a cherub I got with an Empire General Standard bit.

I heard of a few ways to convert a regular Ravenwing sergeant into a librarian-on-a-bike (including using Grey Knights bits), but with Turmiel’s dynamic posing (love that outstretched hand) and iconography it was hard to think of another one that would look nearly as Dark Angels-y.

Once I have him completed I’ll post pics of him, hopefully showing, hopefully, more advancement in painting ability.

Check out my previous ork painting posts for more!

Black Reach

Dredtrukk

Warboss with Attack Squig

Boss Zagstruk

Stormboy Nob on Flying Base

Bad Moons Nazdreg

Dark Angels Dreadnought

Dark Angels Standard Bearer

Off the Top of My Head: Painting 40k Dark Angels Standard Bearer

Off The Top of My Head

My dreadnought got me in the mood to paint more Dark Angels, and I decided to jump into robed characters rather than the standard green-armored tac-marines.

The new finecast standard bearer is a nice-looking model with a great bas-relief standard.  It’s what appealed to me about it.  The chance to paint the raised relief edges and also try my hand at the robes for the first time.  I had mixed results but I was happy with my first effort:

I like the standard, though my edging could use some touch ups...
I like the standard, though my edging could use some touch ups…
This kind of shows how I tried to do the robes.  Not bad but it could use some honing it.
This kind of shows how I tried to do the robes. Not bad but it could use some honing it.
I'm actually most happy with the back of the figure and the banner.  I like the red and gold.
I’m actually most happy with the back of the figure and the banner. I like the red and gold.  Again I need to touch up those highlights…
The base of the banner was fun to try, and I used ANOTHER piece from the defiler to accent the base.
The base of the banner was fun to try, and I used ANOTHER piece from the defiler to accent the base.

Dark Angel Standard Bearer 5

Check out my previous ork painting posts for more!

Black Reach

Dredtrukk

Warboss with Attack Squig

Boss Zagstruk

Stormboy Nob on Flying Base

Bad Moons Nazdreg

Dark Angels Dreadnought

Off the Top of My Head: Painting 40k Dark Angels Dreadnought

Off The Top of My Head

It’s true I love painting orks but, like a lot of 40K folks, I have dedicated myself to a space marine chapter as well.  I went with the Dark Angels over a more codex astartes chapter because of their somewhat mysterious past, duel agenda, and their chapter structure.  Gotta love the Ravenwing…

Since I still consider myself a painting neophyte, I started painting my Dark Angels with something a little easier than even a tactical marine figure: a dreadnought.

With the big, flat surfaces and edges, and larger areas it was a simpler place for me to try out some of the layering techniques I’ve seen more expert painters use.  It also has lots of weapons and mixed colors (though still on larger surfaces) so it wasn’t just a single, drab item but required a bit of creativity.

I used the Assault on Black Reach dreaddy-nought since he’s relatively static and he’d be easier to clean off if I had any painting disasters:

I went with the Dark Angels color scheme recommended by GW: Chaos Black, Caliban base, Biel-Tan shade, Warpstone Glow layer, Moot Green layer 2, Underhive Ash dry brush, with Waywatcher glaze.  Pretty vanilla but I don’t feel ultra-confident enough yet to experiment!

SONY DSC

I added the red sarcophagus front-plate and weapon details to give him a bit of character, but still retaining the Dark Angels general scheme.

SONY DSC

I’ve decided I’ll have a lot of my DAs in 4th Company, so I used the munitorium “4” and “IV” from the transfer sheet to detail him, along with some extra bits from the Dark Angels upgrade sprue (pretty good deal, btw folks.  It’s basically the DA veteran’s kit $14 cheaper!) to make him more Dark Angel-y.  I named him “Puriel” an angel described (by Wikipedia at least!) as “fiery and pitiless”

SONY DSC

SONY DSC

Again, I love basing models and tried my hand at using some of the Forge World weathering powders on his feet and leg armor.  The rest of the base is pretty much just stuff from the GW basing kit again.

SONY DSC

That’s his big brother, Camael, the venerable dreadnought behind him.  He’s just primed (and yes, that’s part of an Icon of Old Caliban on his back…) I haven’t had the guts to finish completely gluing or painting him yet since, as a member of the Deathwing, he’ll be bone white and I want to practice that a bit more before I potentially mess him up!

Check out my previous ork painting posts for more!

Black Reach

Dredtrukk

Warboss with Attack Squig

Boss Zagstruk

Stormboy Nob on Flying Base

Bad Moons Nazdreg

Off the Top of My Head: Painting 40k Ork Warboss Nazdreg

Off The Top of My Head

Since I’m a fan of both Dark Angels and Orks I found Gav Thorpe’s The Purging of Kallidus to be a perfect book for me.  Not only does it include a lot of small details on the functioning of a Space Marine force in the field, but includes the two biggest and baddest ork warlords in a combined effort; the mighty Ghazghkgull Thraka, and the wily Nazdreg Ug Urdgrub.

Ghasghkull was and is still the king of all orks to me; his semi-religious role, brutish persona, yet strangely high-intelligence seems to encompass the most frightening combination of ork traits.  However it’s nice to have options, while looking over an older ork codex I found Nazdreg is a GREAT option for an ork warlord (if only we could get modern rules for him GW!)

Nazdreg is not only a cunning leader, but also a remarkably good shot for an ork (BS4!  BS4!  With a PLASMA weapon!)  He also has fun painting options, as he is a Bad Moons warboss and can be done-up right in bright yellows and ostentatious decorations.

NAZDREG

The old Nazdreg model is nothing like the current line and difficult to field.  He’s SMALLER than most ork boyz, so that’s not an option.  This one is mine.  He came with his boss pole broken so I replaced it with a different one.  Luckily I got an old metal Ghazghkull with the deal I mentioned in a previous post and decided I’d Nazdreg-him up.

SONY DSC

I used the older Big Mek head so he had a different face from Ghazghkull that gave him a Mek look without having weird screws in his head.  I also liked the smug grin and goggles.SONY DSC

There wasn’t an appropriately massive Bad Moon bosspole, so I made my own out of green stuff.  I mounted it on the Lascannons from a Forgeworld Tauros Venator I turned into a warbuggy and stuck a deffdread face on the back.  The skulls came from the Chaos Defiler kit, whose bitz have served me so well since I converted it to the Dredtrukk.  It’s not perfect but I ended up really liking the look of the moon.

SONY DSC

His armor, instead of black with flames, I wanted a bright, blazing yellow.  Mostly to make his stand out even more from my Goff models.  His custom power klaw is made of the lower-potion of Ghazghkull’s with two ork chain blades and a piece from the Skaven Hell-Pit Abomination kit as flexible spiked-knuckles.

SONY DSC SONY DSC

The most difficult, but fun, part of the model was the Kustom-Blasta-X, Nazdreg’s supa-gun.  It’s frequently described as being “multi-barreled” but because it has the “gets hot” profile and the same feel as a plasma gun I thought it would be good to make it LOOK like a plasma gun.  I sheared off the twin-linked big shoota that came with the model (never cut off so much metal before) and used one of the plasma storm batteries from the Land Speeder Vengeance kit.  The little piece underneath is actually a re-fashioned mace head and it has the power supply from a megablasta off of an extra Mek on top.

SONY DSC SONY DSC SONY DSC SONY DSC

Basing is something that I’ve heard a lot of modelers complain about but it’s one of my favorite parts of finishing a model.  I originally wanted to have him on a telly-porta but I couldn’t think of a good way to make that work on a terminator-size base.  So I went with a scene from The Purging of Kadillus that is by far one of my favorites in the Black Library books I’ve read (along with Primarch Corax’s charge into the Iron Warriors in Raven’s Flight, also by Thorpe).  If you haven’t read the book SPOILER ALERT!

In the novel, Chaplain Boreas leads a defense of a power plant against an ork attack. They initially succeed until Nazdreg himself arrives and dooms the space marine/imperial guard defenders.  Boreas challenges Nazdreg to single combat, and, though he fights as best as he can, is ultimately smashed by the Bad Moons Boss.  I like this narrative not only because the fight itself is rousing, but also because it’s a rare instance of orks portrayed in a Black Library book not as comic relief but as the martial menace that they are.  Boreas and Nazdreg fight fairly, and Nazdreg beats Boreas through strength of arms, not blundering into luck.  This is especially impactful in this book as future Deathwing Captain Belial took a similar beating from Ghazghkull in the novel’s background.  I also have a strong memory of Nazdreg addressing the Dark Angel’s leadership through Boreas’ helmet comm with the typical Ork laconism, “Dey’s all dead…”

For my base I have Nazdreg stomping Boreas’ Crozius Arcanum.  The Arcanum is made from the handle of a thunder hammer; the head is actually part of the angel wings off of the Icon of Old Caliban from a Land Speeder Darkshroud kit.  For the Chaplain’s helmet I used a standard space marine helmet, sliced his face off, and glued on the face of a skull (again, those Chaos Defiler bits save the day!)  I then added appropriate muddy texture and various pieces from the GW 40k basing kit.

SONY DSC SONY DSC SONY DSC

Nazdreg’s my favorite model I’ve completed so far.  I hope I can use him (WITH his profile) in games and I’m really hoping GW includes him back into 6th edition when we get our overdue ork upgrade next summer!

SONY DSC SONY DSC SONY DSC SONY DSC

Check out my previous ork painting posts for more!

Black Reach

Dredtrukk

Warboss with Attack Squig

Boss Zagstruk

Stormboy Nob on Flying Base