The Next Warhammer Scenery Painting Challenge!

On March 8, 2017March 7, 2017 By James CastroIn Art, Games, ProjectsLeave a comment

It may be patently obvious from my Sector Imperialis post I love Citadel Scenery.

Being a narrative player the world building portion of the game is my favorite, and nothing builds a story better than creating an interesting environment for your battles.

Over the years I’ve acquired a lot of Warhammer 40k and Warhammer Fantasy battles scenery. I’ve painted a few pieces but never got around to painting the vasst majority. Completing my cityscape got the painting bug back in me and I decided to start doing the rest. It’s no small task but even the small progress I’ve made makes a huge difference!

Craters, earthshaker cannon craters, a crashed Aquila Lander, a Citadel Hill, two Citadel woods, fantasy walls and fences, Magewrath Throne, Eternity Stair, Temple of Skulls, Firestorm Redoubt, some quad guns and Icarus Lascannons, a Wall of Martyrs Bunker, a Haemotrope Reactor, and some Promethium Relay pipes.

A lot of the craters and the hill I hand painted with what was left over from my Realm of Battle board. Everything was spray painted with GW or Army Painter sprays. Mournfang Brown, Desert Yellow, and Khorne Red making of the majority with some Fang spray on the Wall of Martyrs details.

Here you can see more Wall of Martyrs defensive lines, a Plasma Obliterator, a Balewind Vortex, the Honored Imperium set, and two Bastions.

The Skyshield landing pad, Fortress of Redemption, armored shipping containers (behind the towers) Witchfate Tor, Dreadstone Blight, The Garden of Morr, a watch tower and chapel from the fortified manor set (where my walls and fences came from too), Arcane Ruins, and the Dreadfire Portal.

Here’s the lot!

My Basilica Adminstratum, Manufactorum, Shrine of the Aquila, And Sanctum Imperialis ses are actually primered too, but they didn’t fit on my table!

Here’s hoping in the next few weeks I can provide updates on the progress of these sets too. Getting all of this done will be a major accomplishment for me!

Making Easy Wargaming Smoldering Wrecked Vehicle Markers!

On March 1, 2017February 28, 2017 By James CastroIn Art, Games, ProjectsLeave a comment

While trying to re-learn the intricacies of Warhammer 40k again I remembered what a pain it is to show a vehicle as being “wrecked.” Many makers, including Citadel/Games Workshop, make “wrecked” markers, but none of these ever seem to have the gravitas necessary to show the drama of an exploded tank or burning transport.

While re-learning the game I found myself watching a lot of battle reports on YouTube. By far the best have been by StrikingScorpion82 whose games are both narrative and competitive. They are also filled with great personalities and cinematic moments. Scorpion also has a number of reviews and “how to” videos, my favorite being how he makes his wrecked vehicle markers. His are durable, well-built works of art. You can see his technique here:

After seeing this I wanted to make some of my own, but wanted to add a bit of effect and admittedly wanted to spend twenty dollars or less… They aren’t as dynamic as his but are MUCH better than turning a tank of its side! here’s what I did:

I started with some red flickering LED tea lights. I got mine from Amazon for $8.59:

I went for red to give it the internal smoldering look I wanted. They come in packs of twelve to give you plenty to work with.

I added some bent paper clips, which won’t be anywhere near as durable as the copper wire Scorpion uses but I had them on hand. I used Gorilla Glue white to attach them to the candles. I used two different version; one bent in half the other bent to stand all the way up with a folded hook at the top. The latter proved to be FAR easier to work with:

I masked off the bottoms of the candles (where the batteries, electronics, and switches are) and prepped the “smoke” portion.

Scorpion started with cotton wool, but I only had access to polyfill, which I got at Walmart for around $4. I used copious amounts of PVA glue on the sides of the candles and shaped some polyfill around the base. I then took various portions of the polyfill and shaped different “smoke” shapes around and on the paperclip bases:

20170226_183227 — You can see the polyfill around the basses in the back. The rubber bands weren’t actually too hard to take off, but also weren’t really needed. I just held each piece for a few seconds and they usually stayed. Ignore Konrad cat seated in the background…

20170226_184058 — Like Scorpion I made various sizes, based around two basic heights.

I followed the instructions on the tutorial and spray based them all gray.

Then added the black spray around the lower portions of each marker.

You can see the finished videos of them below!

Realm of Battle Sector Imperialis COMPLETED!

On February 22, 2017February 21, 2017 By James CastroIn Art, Games, Projects6 Comments

So it finally happened. Over the weekend I took two days and completed the Sector Imperialis Realm of Battle board I started 2+ years ago!

Again following on from our lord and savior, Duncan Rhodes, I used the techniques he detailed to complete the painting!

Using pre-printed gaming mats is easy and fast, but for drama and detail it’s hard to beat this board. Tt’s flexibility (six tiles that can arranged in various ways) and aesthetic are hard to beat.

You can see the tiny bit of Nurgle’s Rot I added to the open sewers for effect.

In Rhodes’ terrific tutorial he suggested using washes of varying colors to add character to the road. This worked VERY well. Here you can see the colors he recommended, Nuln Oil, Agrax Earthshade, and Athonian Camoshade with Dawnstone drybrushed over it. You can also see the gutters. They have also been washed with all three and finished with some Typhus Corrosion. A bit of Typhus Corrosion was also added to the detritus in the gutters to unify the look.

Other than Skavenblight Dinge, which was used for all the road and stone sections, my Leadbelcher stock took a big hit. All this metal… Here the metal floows and mechanical components are displayed. All were washed in Nuln and drybrushed with Necron Compound.

These bronze sections are some of my favorite pieces. They were based in Balthasar Gold, washed in Nuln Oil, drybrushed with Necron Compound, and detailed with Nihilakh Oxide.

One of the crypt sections and one of the eagles I wanted a marble effect. They were based in Ceramite White, washed in Drakenhof Nightshade, and drybrushed with Prixati White.

If you’re thinking of painting one of these beware…you’ll get through some paint, this handful got me through about half of it:

This was a great project and one I may be detailing and changing periodically as I use it. It’s a great central piece and if you have one a fun project!

Warhammer Fantasy Ogres: Ready for Game On!

On February 25, 2015March 4, 2015 By James CastroIn ProjectsLeave a comment

In a previous post I noted at the guys at Dreamlike (Now Slayer Gaming) piqued my interest in Warhammer Fantasy battles. I watched two battle reports, one was their very first one, where Tom’s Ogre army took on Dwarves in one and High Elves in another. Since then I have started both Skaven and Beatmen armies. I admit I really like Skaven, but both were begun because I was able to get near complete armies on and off the sprue at very cheap prices.

Several weeks ago, while cruising a used bookstore I found a pile of army books. Empire, Ogres, Tomb Kings, Orcs and Goblins, all “current” hardback. All ten dollars a piece. (They also had a stack of Forge World Imperial Armour books for 15 a piece…it was a good day at the used bookstore…)

Looking through the books I became very interested in one army in particular: Ogres. The very first army I ever saw played. They’re very different from any force I’ve seen, Monstrous Infantry, big brutes, no alignment, and a “SMASH and EAT” philosophy. Also relatively cheap to start.

My local Games Workshop store has started a Fantasy escalation league and, though I had Skaven and Beastmen armies, I decided to give Ogres a shot. I got the regiment starter box and away I went.

The league starts at a miniscule 250 points, which if I included even my cheapest general option left me only 150 points for troops.

Because of this point restriction, the standard troop structure is waived and only core units have to be fielded with extra points given for fully-painted armies. With that in mind (and being completely trapped in the house for days due to ice and snow) I started my Ogres. This was the result:

I went all ironfists, due to the extra save. They’ve already got 3 attacks plus impact hits and stomps, so I went for a parry/increased armor save instead of an additional weapon.

At the time I thought I had to have an HQ. I got the maneater on the right to proxy a bruiser or butcher since my actual models were on order.

These guys are a blast to build an paint, and the regiment box gives you so many bits, with some crafty purchases I was able to nearly double the number of ogre bulls I can field by spending about 25 dollars.

I’ll be playing my first escalation game this week and as I’ve never played a REAL game (only here’s how this works games) and never done anything with ogres I’m gonna lose. It’ll be a BLAST. I’m looking forward to it!

Realm of Battle Sector Imperialis Work In Progress

On September 17, 2014September 17, 2014 By James CastroIn Art, Games, ProjectsLeave a comment

Realm of Battle Sector Imperialis Work In Progress

This year I got myself the coolest birthday present I’ve ever gotten myself.

The day I moved in to my new place I decided to spring for the new Stormclaw Warhammer 40k set. I found a trusted seller on eBay was selling it as a rate and ordered it from them. The week it came out I received a message saying they didn’t get as much stock as expected and wouldn’t be able to send it. I could get a refund or use that money to buy something else. While cruising their page I found they were selling the new city scape, Sector Imperialis, at a reduced rate as well. So I applied my Stormclaw money to it and got a 330 table top scenery set for $158 dollars. It was great.

It has been a nice project and one I’ve been looking forward to. A large-scale painting project that can be easily customized and personalized.

I wasn’t quite sure where to start so I watched these videos and soldiered on:

I followed most of these recommendations the letter. I changed the ground color to Mournfang Brown and ran out of Skavenblight Dinge (go for four pots, I have used three there’s enough in the bottom of them for touchups and nothing else) so I used Stormvermin Fur around the Aquila sections.

20140916_225101 — Straight road sections. Clearly needs touch ups, but for 3-4 hours work it’s going faster than expected.

20140916_225119 — This metal section has been touched up a bit. Still need to go back over the Skavenblight, but it’s going quickly. A thin card will work well to keep the right colors where they’re supposed to be.

20140916_225128 — Running out of Skavenblight made me use Stormvermin around these sections. It’ll mix it up nicely I think and will blend well.

I’m going to mix Nuln Oil and Drakenhof Nightshade instead of Athonian Camoshade to give it a dirty blue color instead of earthy green.

20140916_225213 — My painting rig. A big piece of cardboard would work as a pallet but since I’m painting all six sections at once I’m standing up most of the time. The traditional version comes in handy and is only $5. The brushes were $1 each and my water container once contained lunch meat!

I’ve still got the bronze colors and touch ups to do on the basing of this painting but believe it or not this much work only took about 4 hours. It goes fast. I’m looking forward to finishing basing and I’m very eager to start detailing and working on the colors to see what happens. I’m going to take Duncan’s recommendation and try Nurgle’s Rot some of the sewers, and maybe some water effect in some of the other sewers.

20140916_225237 — This project, at 6 feet buy 4 feet, eats up paint. These are the pots I’ve used thus far…

I’ll post more of them as I go. It’ll start to match my NEW Imperial Guard army, which I’m starting in the next week!

In other news…check out the site in the next few weeks as there will be some new merchandise (Finally) I’ll post once the designs are done!

Warhammer Rescues: Taurox the Brass Bull

On June 12, 2014June 11, 2014 By James CastroIn Art, Games, Random FunLeave a comment

Games Workshop has a reputation for occasionally making rules with no models. I’ve actually seen some complaints on this and it’s a trend they seem to be moving away from, however I feel that the spirit of this concept was to allow players and hobbyists to create their own versions of the character or unit in question using existing models as bases or even scratch building pieces.

I have a big Skaven army I got practically new on the sprue and Skaven remain my favorite fantasy battles army, however, I was able to get my hands on a great Beastmen army, in various stages of construction, last year and started to mess around with them a bit too. Though they seem to be one of the least popular choices, their personality appealed to me and this force came with lots of models and options, some of which are hard to find now.

One piece I got was an incomplete pewter Doombull.

It was a bare metal piece with no arms, weapon, or decorations I thought would be fun to convert into one of the Beastmen lords with no model, Taurox the Brass Bull.

I used the rune-inscribed axes from the minotaur kit to make his “Rune Tortured Axes.”

His shoulder guards are actually vambraces from the Cygor/Ghorgon kit I didn’t use. Because his body is metallic I got a chance to play with the Nihilic Oxide technical paint I’ve been wanting to try and gave his armor and ancient, oxidized tone to make it stand out from the copper-gold used on the rest of the model.

I originally had a severed hand as base décor, but decided for someone as massive and vicious as Taurox that would never do… Using a Lord of the Rings Elf horseman archer, I cut his legs off and sculpted some guts out of green stuff. The head comes from a Skaven Stormvermin sprue (it was two heads clutched in a fangleader’s claws, I simply cut one off) and sculpted some hair out of more green stuff. Painting the guts was layers of Biel Tan Green, Carroburg Crimson, and Nurgle’s Rot to give it the slimy, transparent sheen.

Just to use the rest of the technical paints I hadn’t played with I used Agrellan Earth for the base.

I hope GW keeps the rules without models in the army books and codexes for years to come. Creating your own versions are some of the most fun a hobbyist can have. You’ll never see two Tauroxes that look the same!

Check out my previous painting posts for more!

Black Reach

Dredtrukk

Warboss with Attack Squig

Boss Zagstruk

Stormboy Nob on Flying Base

Bad Moons Nazdreg

Dark Angels Dreadnought

Dark Angels Standard Bearer

Dark Angels Librarian

Warhammer 40k Scenery

40k Rescue: Blood Angels Land Raider