Game Room Update: The Fortress of Arrogance

When I moved in to my new place last year one of the things I was most excited about was setting up my new game room.  With a home-made 6×4 table and a wolrd of board games and 40k to play, I couldn’t wait to put up decor and set up my hobby room.  I never thought of naming it until I shared with my RevPub partner my WIP of Commissar Yarrick’s legendary Tank, The Fortress of Arrogance.

I learned of this mighty armored vehicle from Chains of Golgotha and immediately loved the name.  I knew when I started my guard army (built almost ENTIRELY from rage quitters and scrap and a couple of boxed sets admittedly) a version of Yarrick’s pulpit would have to be included.  Here’s my version:

Fortress of Arrogance Pulpit WIPWhen I shared this she commented that it would be a good name for my game space, and I started work on a sign that night that mimicked the “official” markings on the tank as it appears in the Apocalypse expansion.  Here’s what I’ll print for my door:

Fortress Of Arrogance
Built from some Skull line art, and some simple Illustrator work it captures enough of the original and still makes a good readable sign for the door!

As for the Fortress itself it’s progressed a bit.  I was able to get my fantasy armies out of boxes with the addition of the two new inexpensive glass curios, and even added some shelves for the Blood Angels/Flesh Tearers that used to be crammed into the bottom shelf of my IG curio (a couple of chaos engines too big for my storage boxes are up there too.)

20150609_201605

20150609_201612

20150609_201621

20150609_201629

20150609_201639

20150609_201644

20150609_201652

As I get things painted (which I’m working on now, my Vostroyan command squad is up first) I’ll share them.  As can easily be seen I have a lot to paint, but I like to build and play, so painting always seems to take a back seat!

Bullet Point Review: Turbo

BulletPointReviews

This is a new feature I thought up to give reviews of things I just feel like reviewing in a short, sweet way.  I started with a great little animated feature I caught on Netflix that seemed to get lost among the big-budget, sequel-happy world of modern cinema.

Bullet Point Review: Turbo (2013)

  • Title: Turbo
  • Premise: A snail name Theo (aka Turbo) is addicted to speed and racing despite his being, ya know, a snail and wants to enter the Indy 500.
  • Protagonist(s):

o   Theo (Turbo): Main character/Racing Snail (Neverending Story shout out)

o   Chet: Theo’s disapproving Brother

o   Tito: Snail-racing taco vender at Van Nuys, CA mini-mall “Starlight Plaza” who finds Turbo. They work together to achieve their dreams.

o   Whiplash, Smoove Groove, Skid Mark, Burn, and White Shadow: Starlight Plaza racing snails. Whiplash is voice by Samuel L. Jackson and Smoove Groove Snoop Dogg, which means this movie has both a Samuel L. Snail and a Snoop Snail)

o   Paz, Kim Ly, Bobby: Starlight Plaza venders who sponsor Turbo in the Indy 500.

  • Antagonist(s):

o   Evil Mower: Turbo’s first racing opponent.

o   Guy Gagne: Turbo’s REAL racing opponent and Indy 500 Champ.

o   Crows: They eat snails…a lot…

o   Mother Nature: Made Turbo a snail and thus…not very fast…

  • Conflict: Turbo’s addiction to racing affects his job, his relationship with his brother, and dominates his life.
  • Twist: Turbo accidentally Bruce Banners himself with NO2 and gains super-speed! Stan Lee would’ve been proud.
  • Moment I was Hooked: Somewhere around the line “You’re trashtalk is needlessly complicated!” delivered as only Sam Jackson can…
  • Journey: Turbo finds his speed; finds his dreams; and finds that, maybe like Dorothy, he had what he needed all along.
  • Surprisingly…: This movie has a kick ass soundtrack.  Good licensed and original music.
  • Most Relatable When…: Turbo becomes popular by going “viral” from a kid’s random video, including a catchy remix version.  It felt like it could happen because it’s happened oh so many times in the past with oh so many cats…
  • Final Thoughts: I’ve been on a bit of an animated feature kick. Mostly because they are a lot of them on Netflix. I’ve always liked snails so this one called to me. I didn’t have high hopes due to some of the kids’ movies of recent vintage (i.e. Kung Fu Panda…) but was surprised by how much I enjoyed this. Ryan Reynolds, though I’m not usually a fan of his live acting, turns out to be a great voice actor, the supporting cast is also excellent, the story is solid (though cartoonishly fantastical), and the message truly inspiring. Very creative, great fun, and better than most “serious” movies I’ve seen recently.
  • Rating: Four and a half snail shells outta five.

Rating

Turbo Artist
Portrait of the Artist as a Young Snail

Off the Artboard #3 – Vault-Boy-Like Character Creation Part 1

OffTheArtBoard

This is a tutorial requested by my good friend and fellow Illustrator neophyte, Ron Peaks.  Looking to use a simple cartoon character for a manual similar to the cartoon Vault-Boy character from the Fallout series, yet still usable in a non-Bethesda-Obsidian publication.  It sounded like a good challenge so I took him up on it.

I have two warnings about this!  First, it’s a LOT longer than intended, because it has a lot of screenshots.  Second, this is just the way I figured out how to do it with my limited Illustrator knowledge.  I’m sure there are other, better ways, but if you want to learn how to make this kind of character with just basic tools this was the way that was most intuitive to me.  It uses just a few basic tools and is easy to color and personalize.

I’ve tried hard to not sound like Strong Bad trying to teach everyone to draw a dragon… (draw and “s”…then a more different “s”…)

This post will appear in two parts, this on shows how to make the character’s head.  One in a few weeks will show how to make his body.

An Illustrator Simpleton’s Guide to Making a Character that Resembles, Yet is Legally Distinct, from Fallout’s Vault-Boy:

 Step 1:

Create a perfect circle by selecting the ellipse tool, holding alt+shift and left click dragging it onto the page.

VB1

Step 2:

Add two anchor points using the add anchor point tool (it is in the same family as the pen tool left click and hold the pen tool and select it from the list that appears)  in between the left bottom and right top existing anchor points on the circle.  Click the “direct selection” tool, click each of the new anchor points you’ve just created (you may have to click them then click them again to ensure you’ve selected them).  Click and hold and drag them to a new location to warp the circle and make it appear a bit more square.

VB2

Step 3:

Create an oblong ellipse for the left eye.  Select it, ctrl+c to copy, ctrl+b to paste it behind the original eye.  (DO NOT click off of an object you’ve copied behind another object.  It will be extra steps and finagling to get it selectable again.  Any time you ctrl+c, ctrl+b in this tutorial DO NOT click anywhere else on the artboard, as it will deselect the new object and you’ll have to navigate to find it again.)   Then using the arrow keys nudge it to create the right eye.  While the right eye is selected shift+alt and resize and make it slightly smaller than the left (for perspective)

VB3

Step 4:

Select the star tool from the polygons.  Change it from 5 points to 3.  Click on the art board to create a triangle.

VB4

Step 5:

Rotate the triangle so the top point faces left.

VB5

Step 6:

Using the direct selection tool again, move the various specific anchor points to create the desired shape of the nose.

VB6

Step 7:

Using direct selection tool, select the central anchor point on the back of the nose.  Once it’s specifically selected hit delete to remove the line segment.

VB7

Step 8:

Using the ellipse tool create a wide oblong ellipse.  ctrl+c to copy it, ctrl+f to paste it forward and nudge it up.  This will be to create the smile, so feel free to move it to the desired position to make a bigger or different mouth.  You can also change the shape of the circle to make a bigger smile, a frown, or using different shapes and warps to make various expressions.

VB8

Step 9:

Select both circles.  Using the shape builder tool in CS5, hold alt and click and hold the top circle as shown.  Drag the curser through the top of the circles and release.  This will remove the unwanted shapes.

VB9

Step 10:

You’ll be left with just the desired “smile” shape.

VB10

Step 11:

Position the new “smile” in the desired place on the head.

VB11

Step 12:

With the smile selected, ctrl+c to copy, ctrl+f to paste it in front of the smile.  Then, with the new shape selected, go to the menu, click Object–>Transform–>Rotate and type 90 into the box.  Then resize the item using shift+alt again to get it the appropriate size and move it to the corner of the mouth as shown.

VB12

Step 13:

Select the new mouth corner, ctrl+c to copy, ctrl+b to paste it behind.  Nudge it to the other side of the mouth.  Go to Object–>Transform–>Reflect and select vertical.  The select the main mouth shape again.  ctrl+c to copy, ctrl+b to paste behind.  Nudge it below the original mouth.  shift+alt resize it to make it smaller to create the line under the smile as shown.

VB13

Step 14:

Click the main smile shape again.  Ctrl+c and ctrl+f and move it above the eye.

VB14

Step 15:

From the menu select Object–>Transform–>Reflect and select horizontal to flip it.  Then shift+alt resize to get it the desired shape.  You can also select the object and free transform rotate it to get it the desired angle (you can make angry eyes, arched eye brows, etc.)

VB15

Step 16:

Select your new eyebrow.  Ctrl+c, ctrl+b and nudge it with the arrow keys over the right eye.  Go to Object–>Transform–>Reflect and select vertical to flip it and get it the correct angle.  Shift+alt resize it to make it a bit smaller for perspective.

VB16

Step 17:

Click the left eye (his left!)  Ctrl+c, ctrl+b, to paste the copy behind the original.  Nudge the new one up so it’s visible peeking out over the original eye and repeat the process for the other eye.

VB17

Step 18:

Using the ellipse tool, shift+alt to create a perfect circle on the side of the head.

VB18

Step 19:

Select the head shape and the new circle.  Using the shape builder tool, click inside the head shape, hold, and drag to the new circle to join the shapes as shown.

VB19

VB20

Step 20:

Using the ellipse tool create a series of circles on top of the head.  This will be for the hair so feel free to make an arrangement you like.  Just remember we’ll be joining these using shape builder, so it may take a few tries at this to ensure you get the desired final shape.

VB21

Step 21:

If you want the little swooshes as show, create two overlapping circles as shown, and select only those two.

VB22

Step 22:

Using shape builder, select the top circle, click hold+alt to delete the unwanted shape elements.

VB23

VB24

Step 23:

Drag the new crescent to the other circles, select ONLY the ellipses you created for the HAIR (Don’t select ANY of the other elements, especially the head shape.  This will mess up your art…) And join them using click+hold+drag over all the selected shapes.  You may have to do that several times inside the new “hair” shapes to join any extra shapes that might have been missed with the original join actions.

VB25

Step 24:

To add any extra “Swooshes” repeat process Step 21 as many times as you like and shape-builder them into the hair shape.  You can resize them and overlap them to make different shapes.  You can also resize the entire hair section.

VB26

VB27

VB28

VB29

VB30

Step 25:

Create a square using the rectangle tool in the location shown.

VB31

Step 26:

Using direct selection (again you may have to click each anchor point twice to make sure only the anchor is selected not the entire polygon) drag the points to the locations shown.

VB32

Step 27:

Select the “hair” shape and the newly-shaped polygon and join them using shape builder.  Feel free to resize or shape to create the look you’d like.

VB33

Step 28:

Create an ellipse in the location as shown and ctrl+left bracket ( [ ) key to send it to the back.

VB34

Step 29:

Selecting the new ellipse, Ctrl+c, ctrl+b to paste it and nudge it to the other side of the head.  You may wish to reposition it to give it the right angle.

VB35

Step 30:

Create a rounded rectangle and free-transform resize it as shown.

VB36

Step 31:

Free transform rotate it so the angle matches the angle of the square you create for the hair.

VB37

Step 32:

Ctrl+c, ctrl+f to copy and paste it as many times as desired.  Shift+alt resize them to get them the correct size and move them into position as shown.  It may help to move them down and left or right with the arrow keys to keep them in line rather than moving them with the mouse.

VB38

Step 33:

Color your shapes as desired.  Select each shape and select a color from the swatches to give them the desired color!

VBColors

Step 34:

Create two overlapping white ellipses in the left (his left!) eye.

VB39

Step 35:

Selecting your new ellipses, ctrl+c, ctrl+b them then nudge them to the right (his right!) eye. Shift+alt resize them for perspective again.

VB40

There it is, you’ve created a legally-distinct Vault Boy-type character head!

As a bonus!

Want to give him a gruffer look?

Step1:

Overlap the face with another ellipse.

VBExtra1

Step 2:

Select the head shape and new ellipse shape and use the shape builder tool and click+alt to erase the outside ellipse shape.

VBExtra2

VBExtra3

Step 3:

Recolor the ellipse any shade of gray, brown, etc.

VBExtra4

Step 4:

Change the opacity to the desired shade to give him a 5 o’clock shadow look!

VBExtra5

Off the Artboard #2: And They Shall Know No Fear…

2D or otherwise!

Anyone who has read my section in “About Us” knows I have of late gained a massive interest in Warhammer 40k.  Thereby giving me +100 to my “King Dork” abilities.

Honestly, I didn’t even know much about it until “Space Marine,” which was my favorite game from last year.  Purists might scoff at my console-game entry into this vast universe, but, to quote James Rolfe: “To be a fan of anything, you have to be exposed to it first.”  Since discovering the incredibly deep and detailed world of the far future, I have read several novels, collected many art books, played through the Dawn of War series, watched the fun Ultramarines movie, and even started my own army (pics of my first painting attempts coming soon!).

Though I began my knowledge with the Ultramarines and read books about both Space Wolves and Grey Knights, it’s the Librarian-Knowledge-Centric Blood Ravens from Dawn of War that appealed the most to me.

I utilized this overwhelming interest to exercise more of my recently acquired, albeit limited, Illustrator skills.  While I’m still in the “look what I can do with polygons” phase using only the limited tools that come with Illustrator (the preloaded color options, shapes, etc), and creating objects and/or figures that just stand there, I was impressed with how much could be done using just what was learned in a few Google-found tutorials.  This has been a fun exercise in making something I’m interested in to try and learn to operate Illustrator and make using all the tools and functions second nature.  It was also an exercise in mass-production as I started with the basic marine and used parts from that piece to create the others.  I also created two artboards of “stuff,” weapons, insignia, and symbology that could be used over and over in various places to prevent having to re-create anything.

How impressed I’ll be with these early efforts next year only time will tell, but for now I give you my 2D squad of cartoon-style Blood Ravens!

Tactical Marine
My first effort. Basic tactical marine all cartoon’d out.  I gave him a standard bolter and a couple of grenades.
Assault Marine
This one was a nice exercise in different equipment. Making that chainsword was a blast and the first part of the Blood Ravens’ motto can be seen on its blade.
Devastator marine
A heavy-support devastator marine with heavy bolter. This one proved tricky and needs the most correcting. I made him a veteran just to mix up the colors a bit.
Captain/Chapter Master Gabriel Angelos
Captain Angelos with the Godsplitter. Making the artificer parts of his armor were an immensely fun challenge. Also he’s the only one with a human face. He’s still a cartoon but mostly recognizable!
Davian Thule
The final piece of the squad, Davian Thule as a Venerable Dreadnought. This one was obviously the most difficult, I could borrow very little from the others. It was also the most fun to build! There’s some canonical text on his armor.  Davian Thule was my favorite character in the Dawn of War series.  I wanted to ensure his venerable dreadnought state got the respect it deserved.

These were fun creations and made for nice self-taught Illustrator tutorials.  They’re still 2D flat objects, but are pretty far from my first “magnifying glass” creation, even though they were created essentially using the same concepts.  Next I’m going to try some expressive orks and maybe more dynamic character art.  These were fun though and hopefully they’ll be enjoyed!

Off the Artboard #1: Byte Me

Since my previous post ended up being a brief novella due to the desire to express my inexhaustible love for Dragon Warrior I thought I would use this as an opportunity to be more graphical and less textual.

This concept came from my friend Ron Peaks at my day job who thought “You can megabyte me” would make a good t-shirt.  He’s a comedy assassin; the humor always comes from nowhere and slays you instantly.

I made these graphics based on the concept and thought (since I go back far enough) it would be amusing to see the history of “bytes.”  These images used several different techniques in Illustrator, two used 3D effects, two used the perspective tool; they all used various combinations of polygons, shape-builder, and gradients.  They represent a lot of what I learned in my first two months of dedicated Illustrator-ing, were fun to create, and made for nice bright graphics.

So here they are!  He was correct, they probably would make good t-shirts…

Kilo Byte Me
With 5.25 Inch Floppy Disk!
Mega Byte Me
With 3.5 Inch Floppy Disk!
Giga Byte Me
With DVD!
Tera Byte Me
With a Hard Drive!
2D Formats
These were the base graphics I created to build the logos. It was fun to revisit the all the various storage media of my past…

An Illustrator’s Foray into Adobe Illustrator – Week 6

This will be the last one of these as the rest of my Illustrator education will now be appearing in RevPub’s creative projects.  These two tutorials I did in April and related to tracing and coloring in Illustrator.  These are nice lessons, especially good at teaching how to work from images created outside of Illustrator, first using the pen tool, and second using the blob brush and a pen tablet.

Since I didn’t feel like staring at pictures of myself while I learned this and I didn’t want to license any photos I used a couple of pictures of the far more photogenic half of RevPub to try these out.  She makes for a nice cartoon!

This is the first one.  This was appealing as it had a more stylized look, used only Illustrator tools, and provided a simple (but eye catching and dramatic) style:

http://ndesign-studio.com/tutorials/tracing-photo

Raven
The highly contrasted tutorial made this picture look even more eye-catching.

This was the first time I tried this technique and it was effective and has helped immensely with my own work.  Starting with a complicated photograph you definitely don’t want to do any artistic injustice to raised the bar for the work, but it’s made the simple illustrations I do far easier in retrospect.  Honestly I haven’t used this specific technique frequently but it was very effective at teaching the tools needed to create more advanced artwork, especially from photographs or scanned drawings.

The second one was more natural for me as it used the pen tablet.  The pen tablet is still a tricky device for me.  I need to see the marks coming out of the pen to be effective but I’m slowly learning to use it.

http://vectips.com/tutorials/create-a-grisly-zombie-illustration-with-a-pen-tablet/

This tutorial was actually to teach you how to zombify a person, but I thought I’d use the skills taught in the tutorial just to do the basics first (zombies to come later of course…)  This one came better than I expected and taught how to color using the Live Paint Bucket (a tool I didn’t know about that BLEW MY MIND).

Here’s my second tutorial result:

Raven Trace
She was posing in a Halloween costume but I love the expressiveness of this picture and it’s a great smile. It was perfect for tracing and coloring.

These two tutorials, mixed with the others I’ve posted, have really taken me from “What the-?” in Illustrator to creation of my own artwork using multiple layers and tools.  I’m by no means a master in the software, or even professionally proficient, but my knowledge of the software has vastly improved in just a few weeks using the infinite power of the World Wide Webs (or “Internets” if you prefer).  I should write Google a thank you card.

I hope everyone has found these tutorials useful too.  My next Illustrator posts will be things to look forward to in RevPub’s first official “pub” Lil’ Horsemen, which, barring some unforeseen hold-up, is coming Summer-Fall 2012!